
Metrolinx and its contractors continue upgrading GO Transit’s Barrie line as part of the GO Expansion Program.

GO Transit is adjusting service along the 65 Barrie line Saturday, October 31 and Sunday, November 1 to accommodate the Metrolinx construction.
GO trains operate between Allandale Waterfront or Aurora GO stations and Downsview Park GO Station. Trains arrive in and leave all other stations as usually.
GO trains don’t operate between Downsview Park and Union Station.
GO has already replaced many weekend trains with buses. Buses operate between Allandale Waterfront and Highway 407 Bus Terminal. At Highway 407 Station, you can connect to TTC Line 1 Yonge - University trains to travel to or from Downsview Park or Union.
GO is also adjusting schedules for trains along the line from Monday, November 2 until Sunday, November 15. Trains arrive in or leave stations as much as three minutes earlier or later than usually.
GO says, “During the closure, crews are conducting important construction work to support faster, more frequent GO service on the Barrie line.” Metrolinx is expanding key areas of the Barrie-Line corridor to support better service by adding a second track in the future. It’s also significantly upgrading:
Expect construction for the GO Expansion project to disrupt service during more weekends along the 65 Barrie line over the next six months:
- Saturday, November 14 and Sunday, November 15; and
- Saturday, April 24 and Sunday, April 25, 2027.
This weekend, GO is also adjusting service to accommodate Metrolinx construction along three more train lines:
- the 09 Lakeshore East line;
- the 31 Kitchener line; and
- the 71 Stouffville line.
And, no UP Express trains operate this weekend.
Metrolinx and GO plan to accommodate more passengers and increase service along the Barrie line, as part of their GO Expansion Program (formerly “regional express rail”).
After the closure, GO detailed the various activities Metrolinx contractors completed during the weekend:
“During the planned service disruption, crews conducted foundational work for a second track and corridor improvements.
“As part of work on the future Junction Triangle GO Station (previously Bloor-Lansdowne GO Station), crews performed prep work for utility installations. Crews with the Barrie Corridor Downtown project prepared the rail corridor in Toronto for a future second track by carrying out drainage work and constructing noise walls. Crews working along the Davenport Diamond Guideway inspected railway track support components and installed protective plates that help shield railway components from debris and reduce wear over time.
“Work was also accomplished within the rail corridor surrounding Union Station, including installing a new crossover - a section of track that allows trains to switch from one track to another.
“The work involved replacing sections of track, adding new ballast to support and stabilize the tracks, levelling the tracks, testing railway signals and completing safety inspections before returning the tracks to service. This was done using Metrolinx’s new work trains and yellow plant fleet, which are specialized machines that move materials and complete work directly within the rail corridor, limiting road transport.”
